Nylon coated ductile iron service saddles with single or dual stainless steel straps. 101N-H and 202N-H service saddles use spring washers to compensate for pipe contraction during temperature and pressure changes.
Manufactured in the USA.
SIZES 2" - 12"
OUTLET SIZES 1/2" - 2-1/2"
COMPATIBILITY HDPE pipe with a minimum wall thickness of SDR26.
WORKING PRESSURE Pressure rating of the pipe up to 150 psi.
CASTING The saddle body is cast from ductile (nodular) iron, meeting or exceeding ASTM A 536, Grade 65-45-12.
GASKET Gasket is made from NSF 61 approved Nitrile Butadiene Rubber (NBR) compounded for water and sewer service and a tolerance of petroleum products in accordance with ASTM D 2000 MBC 610. Other compounds available for special applications.
STRAPS Type 304 (18-8) heavy gauge Stainless Steel, two inches wide to spread out clamping forces on the pipe. GMAW and GTAW welds. Passivated for corrosion resistance.
BOLTS, NUTS For 3", 1/2" UNC roll thread Type 304 (18-8) Stainless Steel bolts with heavy hex nuts. 4" and above use 5/8" UNC roll thread Type 304 (18-8) Stainless Steel bolts with heavy hex nuts. All welds fully passivated for enhanced corrosion resistance. Nuts coated to prevent galling.
WASHERS 1/2” or 5/8” flat, type 304 (18-8) heavy gauge Stainless Steel and plastic washer to prevent galling.
SPRING WASHERS 1/2” or 5/8" 304 Stainless Steel spring washers manufactured from a special grade of Stainless Steel used in the making of springs.