style 101Ns
Nylon coated ductile iron service saddle with stainless steel strap.
Manufactured in the USA.
SIZES 1-1/2" - 12"
OUTLET SIZES 1/2" - 2-1/2"
COMPATIBILITY Steel, cast iron, asbestos cement and other types of pipe.
WORKING PRESSURE Up to 350 psi.
NSF61 Certified.
MATERIALS
CASTING The saddle body is cast from ductile (nodular) iron, meeting or exceeding ASTM A 536, Grade 65-45-12.
GASKET Gasket is made from Nitrile Butadiene Rubber (NBR) compounded for water and sewer service and a tolerance of petroleum products in accordance with ASTM D 2000 MBC 610 and NSF 61 Certified. Other compounds available for special applications.
STRAPS Type 304 (18-8) heavy gauge Stainless Steel per ASTM A 240. Straps are two inches wide to spread out clamping forces on the pipe. GMAW and GTAW welds. Passivated for corrosion resistance.
BOLTS, NUTS For sizes 1-1/2" through 3", 1/2" UNC roll thread Type 304 (18-8) Stainless Steel bolts with heavy hex nuts. 4" and above use 5/8" UNC roll thread Type 304 (18-8) Stainless Steel bolts with heavy hex nuts. Rod for bolts are per ASTM A 240 and nuts are per ASTM A 194. All welds fully passivated for enhanced corrosion resistance. Nuts coated to prevent galling.
WASHERS Flat, type 304 (18-8) heavy gauge Stainless Steel.
COATING Casting is coated with fusion bonded black nylon, 10-14 mils thick, with a dielectric strength of 1,000 v/mil and NSF 61 Certified.
