style 101S
Shop coat ductile iron service saddle with stainless steel strap.
Manufactured in the USA.
SIZES 1-1/2" - 12"
OUTLET SIZES 1/2" - 2 1/2"
COMPATIBILITY Steel, asbestos cement and cast iron pipe.
WORKING PRESSURE Up to 350 psi.
MATERIALS
CASTING The saddle body is cast from ductile (nodular) iron, meeting or exceeding ASTM A 536, Grade 65-45-12.
GASKET Gasket is made from Nitrile Butadiene Rubber (NBR) compounded for water and sewer service and a tolerance of petroleum products in accordance with ASTM D 2000 MBC 610 and NSF 61 Certified. Other compounds available for special applications.
STRAPS Type 304 (18-8) heavy gauge Stainless Steel per ASTM A 240. Straps are two inches wide to spread out clamping forces on the pipe. GMAW and GTAW welds. Passivated for corrosion resistance.
BOLTS, NUTS For sizes 1-1/2" through 3", 1/2" UNC roll thread Type 304 (18-8) Stainless Steel bolts with heavy hex nuts. 4" and above use 5/8" UNC roll thread Type 304 (18-8) Stainless Steel bolts with heavy hex nuts. Rod for bolts are per ASTM A 240 and nuts are per ASTM A 194. All welds fully passivated for enhanced corrosion resistance. Nuts coated to prevent galling.
WASHERS Flat, type 304 (18-8) heavy gauge Stainless Steel.
COATINGS Shop coat applied to cast parts for corrosion protection in transit.
